RIP Interfaces Tab

•	Network > Virtual Routers > RIP > Interfaces

Use the following fields to configure RIP interfaces:

RIP – Interface Settings	Description
Interface	Select the interface that runs the RIP protocol.
Enable	Select to enable these settings.
Advertise	Select to enable advertisement of a default route to RIP peers with the specified metric value.
Metric	Specify a metric value for the router advertisement. This field is visible only if you enable Advertise.
Auth Profile	Select the profile.
Mode	Select normal, passive, or send-only.
BFD	To enable BFD for a RIP interface (and thereby override the BFD setting for RIP, as long as BFD is not disabled for RIP at the virtual router level), select one of the following: • default (profile with the default BFD settings) • a BFD profile that you created on the firewall • New BFD Profile to create a new BFD profile Select None (Disable BFD) to disable BFD for the RIP interface.

Parent topic 

RIP