Use the Log Settings page to forward the following log types to external services:
|
|
|
|
|
|
|
|
By default, Panorama forwards All Logs of the type for which you are adding the match list profile. To forward a subset of the logs, open the drop-down and select an existing filter or select Filter Builder to add a new filter. For each query in a new filter, specify the following fields and Add the query:
|
•
|
Connector—Select the connector logic (and/or) for the query. Select Negate if you want to apply negation to the logic. For example, to avoid forwarding logs from an untrusted zone, select Negate, select Zone as the Attribute, select equal as the Operator, and enter the name of the untrusted Zone in the Value column.
|
|
•
|
Attribute—Select a log attribute. The options depend on the log type.
|
|
•
|
Operator—Select the criterion to determine whether the attribute applies (such as equal). The available options depend on the log type.
|
|
•
|
Value—Specify the attribute value for the query to match.
|
To display or export the logs that the filter matches, select View Filtered Logs. This tab provides the same options as the Monitoring tab pages (such as Monitoring > Logs > Traffic).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
|
Add an action and enter a name to describe it.
|
|
•
|
Configure the IP-Tag Timeout to set, in minutes, the amount of time that IP address-to-tag mapping is maintained. Setting the timeout to 0 means that the IP-Tag mapping does not timeout (range is 0 to 43200 (30 days); default is 0).
|
|
•
|
Enter or select the Tags you want to apply or remove from the target source or destination IP address. You can tag the source IP address only, in Correlation logs and HIP Match logs.
|
|
