Network > Routing > Routing Profiles

RIPv2 Routing Profiles	Description
RIPv2 Global Timer Profile
Name	Enter a name for the profile (maximum of 63 characters). The name must start with an alphanumeric character, underscore (_), or hyphen (-), and contain zero or more alphanumeric characters, underscore (_) or hyphen(-). No dot (.) or space is allowed.
Update Interval	Enter number of seconds between regularly scheduled routing Update messages; range is 5 to 2,147,483,647; default is 30.
Expire Interval	Enter number of seconds that a route can be in the routing table without being updated; range is 5 to 2,147,483,647; default is 180. After the Expire interval is reached, the route is still included in Update messages until the Delete interval is reached.
Delete Interval	Enter number of seconds in Delete interval; range is 5 to 2,147,483,647; default is 120. When an expired route in the routing table reaches the Delete interval, it is deleted from the routing table.
RIPv2 Authentication Profile
Name	Enter a name for the profile (maximum of 63 characters). The name must start with an alphanumeric character, underscore (_), or hyphen (-), and contain zero or more alphanumeric characters, underscore (_) or hyphen(-). No dot (.) or space is allowed.
Type	Select the type of authentication: md5 (use RIP MD5 authentication method) or password (Simple password authentication).
Password	(Simple password authentication) Enter the password (a maximum of 16 characters) and Confirm Password.
MD5	(RIP MD5 authentication) Enter the MD5 Key-ID; range is 0 to 255.
Key	(RIP MD5 authentication) Enter the MD5 Key (a maximum of 16 characters) and Confirm Key.
use this key when sending packet	(RIP MD5 authentication) Select to make this key the Preferred key.
RIPv2 Redistribution Profile
Name	Enter a name for the profile (maximum of 63 characters). The name must start with an alphanumeric character, underscore (_), or hyphen (-), and contain zero or more alphanumeric characters, underscore (_) or hyphen(-). No dot (.) or space is allowed.
IPv4 Static	Select to allow configuration of this portion of the profile.
Enable (default) or Disable	Enable the IPv4 Static portion of the profile.
Metric	Specify the Metric to apply to the static routes being redistributed into RIPv2 (range is 1 to 65,535).
Route-Map	Select or create a Redistribution Route Map to control which IPv4 static routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.
Connected	Select to allow configuration of this portion of the profile.
Enable (default) or Disable	Enable the Connected portion of the profile.
Metric	Specify the Metric to apply to the connected routes being redistributed into RIPv2 (range is 1 to 65,535).
Route-Map	Select or create a Redistribution Route Map to control which connected routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.
BGP AFI IPv4	Select to allow configuration of this portion of the profile.
Enable (default) or Disable	Enable the BGP AFI IPv4 portion of the profile.
Metric	Specify the Metric to apply to the BGP IPv4 routes being redistributed into RIPv2 (range is 0 to 4,294,967,295).
Route-Map	Select or create a Redistribution Route Map to control which BGP IPv4 routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.
OSPFv2	Select to allow configuration of this portion of the profile.
Enable (default) or Disable	Enable the OSPFv2 portion of the profile.
Metric	Specify the Metric to apply to the OSPFv2 routes being redistributed into RIPv2 (range is 0 to 4,294,967,295).
Route-Map	Select or create a Redistribution Route Map to control which OSPFv2 routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.

Enter a name for the profile (maximum of 63 characters). The name must start with an alphanumeric character, underscore (_), or hyphen (-), and contain zero or more alphanumeric characters, underscore (_) or hyphen(-). No dot (.) or space is allowed.

Update Interval

Enter number of seconds between regularly scheduled routing Update messages; range is 5 to 2,147,483,647; default is 30.

Expire Interval

Enter number of seconds that a route can be in the routing table without being updated; range is 5 to 2,147,483,647; default is 180. After the Expire interval is reached, the route is still included in Update messages until the Delete interval is reached.

Delete Interval

Enter number of seconds in Delete interval; range is 5 to 2,147,483,647; default is 120. When an expired route in the routing table reaches the Delete interval, it is deleted from the routing table.

RIPv2 Authentication Profile

Name

Type

Select the type of authentication: md5 (use RIP MD5 authentication method) or password (Simple password authentication).

Password

(Simple password authentication) Enter the password (a maximum of 16 characters) and Confirm Password.

MD5

(RIP MD5 authentication) Enter the MD5 Key-ID; range is 0 to 255.

Key

(RIP MD5 authentication) Enter the MD5 Key (a maximum of 16 characters) and Confirm Key.

use this key when sending packet

(RIP MD5 authentication) Select to make this key the Preferred key.

RIPv2 Redistribution Profile

Name

IPv4 Static

Select to allow configuration of this portion of the profile.

Enable (default) or Disable

Enable the IPv4 Static portion of the profile.

Metric

Specify the Metric to apply to the static routes being redistributed into RIPv2 (range is 1 to 65,535).

Route-Map

Select or create a Redistribution Route Map to control which IPv4 static routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.

Connected

Select to allow configuration of this portion of the profile.

Enable (default) or Disable

Enable the Connected portion of the profile.

Metric

Specify the Metric to apply to the connected routes being redistributed into RIPv2 (range is 1 to 65,535).

Route-Map

Select or create a Redistribution Route Map to control which connected routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.

BGP AFI IPv4

Select to allow configuration of this portion of the profile.

Enable (default) or Disable

Enable the BGP AFI IPv4 portion of the profile.

Metric

Specify the Metric to apply to the BGP IPv4 routes being redistributed into RIPv2 (range is 0 to 4,294,967,295).

Route-Map

Select or create a Redistribution Route Map to control which BGP IPv4 routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.

OSPFv2

Select to allow configuration of this portion of the profile.

Enable (default) or Disable

Enable the OSPFv2 portion of the profile.

Metric

Specify the Metric to apply to the OSPFv2 routes being redistributed into RIPv2 (range is 0 to 4,294,967,295).

Route-Map

Select or create a Redistribution Route Map to control which OSPFv2 routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.