Enable Threat Packet Capture

•	Objects > Security Profiles

To enable the firewall to capture packets when it detects a threat, enable the packet capture option in the security profile.

First select Objects > Security Profiles and then modify the desired profile as described in the following table:

Packet Capture Options in Security Profiles	Location
Antivirus	Select a custom antivirus profile and, in the Antivirus tab, select Packet Capture.
Anti-Spyware	Select a custom Anti-Spyware profile, click the DNS Signatures tab and, in the Packet Capture drop-down, select single-packet or extended-capture.
Vulnerability Protection	Select a custom Vulnerability Protection profile and, in the Rules tab, click Add to add a new rule or select an existing rule. Then select the Packet Capture drop-down and select single-packet or extended-capture.

Note: 

In Anti-Spyware and Vulnerability Protection profiles, you can also enable packet capture on exceptions. Click the Exceptions tab and in the Packet Capture column for a signature, click the drop-down and select single-packet or extended-capture.

(Optional) To define the length of a threat packet capture based on the number of packets captured (which is based on a global setting), select Device > Setup > Content-ID and, in the Content-ID™ Settings section, modify the Extended Packet Capture Length (packets) field (range is 1-50; default is 5).

After you enable packet capture on a security profile, you need to verify that the profile is part of a security rule. For information on how to add a security profile to a security rule, see Security Policy Overview.

Each time the firewall detects a threat when packet capture is enabled on the security profile, you can download ( ) or export the packet capture.

Parent topic 

Monitor > Packet Capture